Arborilogical Services, Inc

Standards and Scope of Work to be Performed

STANDARD PRUNING:

Pruning of entire tree to remove deadwood down to 1/2″ in diameter, interfering limbs where practical, clearances for (house, walks, drives and streets) where needed, weight reduction on long heavy limbs and selective removal of interior growth. This does not completely remove all interior growth. We do not advocate striping or over thinning. (See Over-Pruning). All brush, logs and debris removed from site at no extra charge.

CLASS II PRUNE:

Standard prune with the exception that deadwood down to 1″ in diameter will be removed.

CLASS III PRUNE:

Standard prune with the exception that deadwood down to 2″ in diameter will be removed.

CLEARANCES:

Roof clearance 3-4 feet, walks 7 feet, drives and residential streets12 feet, & roads 14-15 feet.

WEIGHT REDUCTION:

Selective removal of limbs at the ends of long heavy branches.

ALL TREES ARE DIFFERENT & UNIQUE:

The above specifications are a general guideline. Where special circumstances exist, these situations will be addressed on an individual basis.

PLEASE NOTE: NONE OF OUR PRUNING COMPLETELY REMOVES INTERIOR GROWTH OR SPROUTS AS THEY ARE CALLED. THIS IS STRIPPING OF LIMBS AND IS NOT A HEALTHY OR PROPER APPROACH TO PRUNING.

TREE REMOVAL AND STUMP GRINDING:

This is a two step process.

1. The first crew removes the tree as close to ground level as possible.
2. Then, the stump grinding crew is scheduled to return, usually in 7 – 10 days to grind the stump. Stumps are normally ground to a depth of 6 – 8 inches unless other provisions are made.

NOTE: WE CANNOT BE RESPONSIBLE FOR UTILITIES OR IRRIGATION LINES WHICH HAVE NOT BEEN IDENTIFIED.

There are species that will produce root sprouts, Cottonwood, Chinese Tallow, Crepe Myrtle, even if the stump and surface roots are completely ground out. They must be handled with additional treatment.

Comments are closed.